Pitched roof? Mounting Solutions’ PV assembly system is perfect for the job!

Text-Block

All our products have been developed for quality and ease of assembly. That also applies to our alumi­nium fastening systems for photo­vol­taic systems on pitched roofs. We have developed the ideal substruc­ture for every roofing – from tiles to trape­zo­idal sheet metal to sandwich panels. Pre-assem­­bled compon­ents facili­tate quick and easy, as well as flexible assembly, even on steep-slope roofs. Our material of choice is alumi­nium. It is light­weight, immune to corro­sion and tempe­ra­ture varia­tions, plus it’s recyclable – ideal for a long life on pitched roofs. We support the design with our MoSo tool. This software can be used to create a report and parts list, as well as a verifiable struc­tural analysis for each project – whether flat roof, pitched roof, carport, or greenfield.

Button-Block
Trennlinie-Block
Text-Block

The benefits of our pitched roof system

Regard­less of the specific type of roof, our pitched-roof products have these benefits in common:

Banner Liste-Block

Pre-assem­­bled compon­ents make it easier to work on the roof

Only a few tools are required for assembly

Alumi­nium makes them light­weight and resilient

Click clamps or clamps with threaded plates provide high a holding force

Produktdetails-Block
Tiled roof
Tiled roof
  • Suitable for tiled and slate roofs
  • Roof pitches from 10 to 60 degrees possible 
  • Three-way adjus­table alumi­nium roof hook with only two bolts
  • Support profile assembly with only one bolt
  • Single-layer and cross-connec­­tion instal­la­tions possible
  • Light­weight and resilient
  • Harder alumi­nium alloy for alpine roof hooks
Hanger bolts
Hanger bolts
  • EPDM rubber included
  • Pre-assem­­bled quick-assembly adapter for quick and easy support profile assembly
  • Single-layer and cross-connec­­tion possible
  • Horizontal and vertical module alignment
  • Click clamps, clamps with threaded plates
Sandwich panels
Sandwich panels
  • Direct load transfer to the purlins
  • Diffe­rent support profile dimen­sions allow for greater distances between purlins
  • Pre-assem­­bled EPDM rubber for a perfect seal between the roofing and trape­zo­idal sheet metal connector
  • Direct module cable fastening on the trape­zo­idal sheet metal connector
  • Clamping on the long module side
Folded sheet metal roof
Folded sheet metal roof
  • Can be used on all roofing materials, inclu­ding copper roofing
  • Can be combined with diffe­rent support profile dimensions
  • Penetra­­tion-free fastening with sheet metal seam, angled standing seam and round seam clamps
  • Transfer of high forces to the roofing
  • Exten­si­vely tried and struc­tu­rally tested sheet metal seam clamps
  • Pre-assem­­bled fixing bolts for quick assembly
Text-Block

Our PV assembly systems for trapezoidal sheet metal roofs

  • Can be mounted on alumi­nium and steel sheet roofing
  • Thin sheet metal bolts for chipless fastening of the trape­zo­idal sheet metal connector
  • Pre-assem­­bled EPDM rubber for sealing between the roofing and trape­zo­idal sheet metal connector
  • The thin sheet metal bolts with hardened steel tips included in the set enable the chipless fastening of the trape­zo­idal sheet metal connector due to the material displacement
  • The module cable can be clipped directly to the trape­zo­idal sheet metal connector
  • Click clamps and clamps with threaded plates
Produktdetails-Block
Trape­zo­idal sheet metal connector
Trape­zo­idal sheet metal connector
  • Horizontal and vertical module alignment
  • Can be mounted on alumi­nium and steel sheet roofing
  • Roof pitches from 5 to 35 degrees
Elevated trape­zo­idal sheet metal connector
Elevated trape­zo­idal sheet metal connector
  • For low roof pitches, the modules can be elevated by an additional 5 or 7 degrees
  • Can be mounted on curved or barrel roofs
  • Horizontal and vertical module alignment
  • Alumi­nium sheet roofing from 0.75 mm possible
  • Steel sheet roofing from 0.5 mm possible
  • Maximum total module incli­na­tion, inclu­ding roof incli­na­tion, 20 degrees
Short rails
Short rails
  • Horizontal module orientation
  • Clamping on the long module side
  • Can be mounted on alumi­nium and steel sheet roofing
  • Roof pitches from 5 to 25 degrees possible
Trennlinie-Block
Ansprechpartner-Block

Your contact for the pitched roof systems

Reinhard Bolter

Reinhard Bolter

Gewer­be­straße 1
A‑6710 Nenzing
Österreich
Trennlinie-Block
Referenz-Slider-Block

Projects we’ve implemented

Melk: Open space GMS Max

Baumgar­ten­berg: Open Space Kits 2.2

St. Johann: Open Space Kits 2.2

Würflach: Open Space Kits 2.2

Salzburg: Open space kits 2.2

Schwert­berg: facade system

Betriebsurlaub

Mounting Solutions hat vom 23.08.2021 bis zum 05.09.2021 Betriebsurlaub.